LIGO PRO BLE User Guide

Safety Information

This section documents all safety-related information per IEC/IEEE 82079-1 and ANSI Z535.6 standards.

What to fill in:

• General safety requirements (PPE, qualified personnel, working conditions)
• Specific hazards using callouts:
  • {{Danger|title=...|body=...}} — imminent hazard, death/serious injury
  • {{Warning|title=...|body=...}} — potential hazard, possible injury
  • {{Caution|title=...|body=...}} — potential equipment damage
  • {{Notice|title=...|body=...}} — important info, no hazard
• Emergency procedures (fire, electric shock, chemical exposure, evacuation)
• Emergency contact numbers

Example callout:

ℹ️ NOTICE — Sample Notice
Read entire guide before installation. Qualified technicians only. Wear PPE.

Product Overview

Introduce the product: what it is, what it does, and key value proposition.

What to fill in:

• 1–2 paragraph product description: name, category, primary function, key features
• Intended Use — bullet list of applications the product is designed for
• NOT Intended For — bullet list of excluded applications (safety/regulatory)
• Product Variants — table of variants if multiple SKUs exist (Variant / Description / Use Case)

Example structure:

• Paragraph: "The [Product Name] is a [type] device designed for [primary application]..."
• Variants table with columns: Variant | Description | Use Case

Package Contents

List everything included in the shipment box.

What to fill in: table with columns:

• No. — item number (1, 2, 3, ...)
• Item — item name (vd: "Main sensor unit", "Mounting bracket", "Connection cable 2m")
• Quantity — quantity per package (vd: 01, 02)

Important note to include: "Verify all items are present before installation. Contact support if any item is missing or damaged."

Specifications

Technical specifications of the product per IEC/IEEE 82079-1.

What to fill in: specification table with columns Parameter / Value / Unit, covering:

• Mechanical: Dimensions (L × W × H), Weight
• Environmental: Operating temperature, Storage temperature, Ingress protection (IP)
• Electrical: Power supply, Current consumption (avg/peak/sleep)
• Wireless (if applicable): Bluetooth/WiFi/LoRa protocol
• Service life (expected years)

Sub-sections to consider:

• Technical Specifications — main spec table
• Dimensions — mechanical drawing image (upload as "Product-dimensions.png")
• Pinout/Connector (if applicable)

Installation

Step-by-step installation procedure.

Pre-requisite: "Before installation: Read Safety Information section."

What to fill in (sub-sections):

• Tools Required — bullet list of tools + PPE
• Step 1: Site Preparation — clean mounting surface, clearance, power off
• Step 2: Mounting — physical mounting procedure with torque values
• Step 3: Connection — electrical/wireless connection with wire color codes
• Step 4: Verification — how to verify installation (LED status, app discovery)

Optional: mounting diagram image (upload as "Product-mounting.png")

Configuration

Software setup after physical installation.

What to fill in (sub-sections):

• Mobile Application — iOS/Android app download links + required permissions
• Connecting Sensor — numbered steps to discover and pair device
• Calibration — calibration procedure (Set Full, Set Empty, etc.)
• Configurable Parameters — table with columns: Parameter / Default / Range / Description
  • Common params: Device name, Measurement interval, Output protocol, Password

Operation

Day-to-day usage instructions for end users.

What to fill in (sub-sections):

• Reading Data — how data is delivered (gateway, app, cloud)
• Calibration Methods — table of available calibration methods with recommended option
• Long-Range Operation — range settings for challenging environments
• Protective Accessories — optional caps/housings if applicable
• Operating Modes — normal/diagnostic/sleep modes if applicable

Troubleshooting

Common problems and solutions for end users.

What to fill in: table with columns:

• Symptom — what user observes (vd: "Device does not power on", "No Bluetooth connection")
• Possible Cause — bullet list of potential causes
• Solution — bullet list of step-by-step solutions

Closing note: "If problem persists, contact Support."

Maintenance

Periodic maintenance and end-of-life procedures.

What to fill in (sub-sections):

• Periodic Inspection — table: Frequency (Monthly/Quarterly/Annually/5-year/8-10 year) / Action
• Cleaning — procedure with prohibited materials (solvents, abrasives)
• Battery Replacement (if applicable) — procedure + safety warnings
• Calibration Verification — re-calibration after maintenance
• Disposal / End-of-Life — recycling instructions per WEEE/RoHS

Required safety callout:

⚠️ WARNING — Battery Replacement Safety
Replace only with authorized part. Disconnect before opening. Wear chemical-resistant gloves. Observe correct polarity.

Certification / Compliance

Regulatory certifications and standards compliance.

What to fill in (sub-sections with tables):

• Wireless / Radio — Region / Standard / Status (CE RED, FCC Part 15, ISED RSS, UKCA)
• Environmental — Standard / Status (RoHS 3, REACH, WEEE, Battery WEEE)
• Mechanical — Standard / Rating (IEC 60529 IP rating)
• Bluetooth Qualification (if applicable) — QDID, SIG Member ID, EPDID
• Warranty — period, exclusions, void conditions

Cross-references:

• See Product Certification & Approvals for detailed certificates
• See Product Memberships for SIG memberships

Support / Contact

Customer support channels.

What to fill in: contact table with rows:

• Website — sojielectronics.com
• Email — support@sojielectronics.com
• Phone — support number
• Address — full company address
• Service hours — vd: "Mon–Fri, 08:00–17:00 GMT+7"

Revision History

Loading revision history...