LIGO PRO BLE User Guide
Safety Information
This section documents all safety-related information per IEC/IEEE 82079-1 and ANSI Z535.6 standards.
What to fill in:
- General safety requirements (PPE, qualified personnel, working conditions)
- Specific hazards using callouts:
{{Danger|title=...|body=...}}— imminent hazard, death/serious injury{{Warning|title=...|body=...}}— potential hazard, possible injury{{Caution|title=...|body=...}}— potential equipment damage{{Notice|title=...|body=...}}— important info, no hazard
- Emergency procedures (fire, electric shock, chemical exposure, evacuation)
- Emergency contact numbers
Example callout:
| ℹ️ NOTICE — Sample Notice |
|---|
|
Read entire guide before installation. Qualified technicians only. Wear PPE. |
Product Overview
Introduce the product: what it is, what it does, and key value proposition.
What to fill in:
- 1–2 paragraph product description: name, category, primary function, key features
- Intended Use — bullet list of applications the product is designed for
- NOT Intended For — bullet list of excluded applications (safety/regulatory)
- Product Variants — table of variants if multiple SKUs exist (Variant / Description / Use Case)
Example structure:
- Paragraph: "The [Product Name] is a [type] device designed for [primary application]..."
- Variants table with columns: Variant | Description | Use Case
Package Contents
List everything included in the shipment box.
What to fill in: table with columns:
- No. — item number (1, 2, 3, ...)
- Item — item name (vd: "Main sensor unit", "Mounting bracket", "Connection cable 2m")
- Quantity — quantity per package (vd: 01, 02)
Important note to include: "Verify all items are present before installation. Contact support if any item is missing or damaged."
Specifications
Technical specifications of the product per IEC/IEEE 82079-1.
What to fill in: specification table with columns Parameter / Value / Unit, covering:
- Mechanical: Dimensions (L × W × H), Weight
- Environmental: Operating temperature, Storage temperature, Ingress protection (IP)
- Electrical: Power supply, Current consumption (avg/peak/sleep)
- Wireless (if applicable): Bluetooth/WiFi/LoRa protocol
- Service life (expected years)
Sub-sections to consider:
- Technical Specifications — main spec table
- Dimensions — mechanical drawing image (upload as "Product-dimensions.png")
- Pinout/Connector (if applicable)
Installation
Step-by-step installation procedure.
Pre-requisite: "Before installation: Read Safety Information section."
What to fill in (sub-sections):
- Tools Required — bullet list of tools + PPE
- Step 1: Site Preparation — clean mounting surface, clearance, power off
- Step 2: Mounting — physical mounting procedure with torque values
- Step 3: Connection — electrical/wireless connection with wire color codes
- Step 4: Verification — how to verify installation (LED status, app discovery)
Optional: mounting diagram image (upload as "Product-mounting.png")
Configuration
Software setup after physical installation.
What to fill in (sub-sections):
- Mobile Application — iOS/Android app download links + required permissions
- Connecting Sensor — numbered steps to discover and pair device
- Calibration — calibration procedure (Set Full, Set Empty, etc.)
- Configurable Parameters — table with columns: Parameter / Default / Range / Description
- Common params: Device name, Measurement interval, Output protocol, Password
Operation
Day-to-day usage instructions for end users.
What to fill in (sub-sections):
- Reading Data — how data is delivered (gateway, app, cloud)
- Calibration Methods — table of available calibration methods with recommended option
- Long-Range Operation — range settings for challenging environments
- Protective Accessories — optional caps/housings if applicable
- Operating Modes — normal/diagnostic/sleep modes if applicable
Troubleshooting
Common problems and solutions for end users.
What to fill in: table with columns:
- Symptom — what user observes (vd: "Device does not power on", "No Bluetooth connection")
- Possible Cause — bullet list of potential causes
- Solution — bullet list of step-by-step solutions
Closing note: "If problem persists, contact Support."
Maintenance
Periodic maintenance and end-of-life procedures.
What to fill in (sub-sections):
- Periodic Inspection — table: Frequency (Monthly/Quarterly/Annually/5-year/8-10 year) / Action
- Cleaning — procedure with prohibited materials (solvents, abrasives)
- Battery Replacement (if applicable) — procedure + safety warnings
- Calibration Verification — re-calibration after maintenance
- Disposal / End-of-Life — recycling instructions per WEEE/RoHS
Required safety callout:
| ⚠️ WARNING — Battery Replacement Safety |
|---|
|
Replace only with authorized part. Disconnect before opening. Wear chemical-resistant gloves. Observe correct polarity. |
Certification / Compliance
Regulatory certifications and standards compliance.
What to fill in (sub-sections with tables):
- Wireless / Radio — Region / Standard / Status (CE RED, FCC Part 15, ISED RSS, UKCA)
- Environmental — Standard / Status (RoHS 3, REACH, WEEE, Battery WEEE)
- Mechanical — Standard / Rating (IEC 60529 IP rating)
- Bluetooth Qualification (if applicable) — QDID, SIG Member ID, EPDID
- Warranty — period, exclusions, void conditions
Cross-references:
- See Product Certification & Approvals for detailed certificates
- See Product Memberships for SIG memberships
Support / Contact
Customer support channels.
What to fill in: contact table with rows:
- Website — sojielectronics.com
- Email — support@sojielectronics.com
- Phone — support number
- Address — full company address
- Service hours — vd: "Mon–Fri, 08:00–17:00 GMT+7"
Revision History
Loading revision history...